Tag Archives: goggles

Cleaning Battery terminals – Remove Corrosion Quick and Easy

Clean Your Corroded Battery Terminals In A Jiffy!

Hi Y’All!

Welcome to The Hard Hat Belles where we do and learn with lots of laughter.  Pull up a seat and grab your cup of tea, coffee or whatever you prefer to drink and be ready for some fun.

Tea for twoLet There Be . . . . . No Lights

It is dusk outside and even darker in the house.  Just about the time that I should start turning on the lights.  It is still winter outside and the house is a little bit chilly from the winds that are blowing against it.

I always start in the living room turning on both lamps, then move to the kitchen and turn on the two overhead lights in there.  As I move from room to room, turning on the lights one by one to brighten my living space, the area becomes more cozy and homey.  I work my way to the back of the house to turn on the porch lights for late arrivals.

I am home alone enjoying the peace and quiet.  No television or radio to distract me from the peacefulness.  I dip two tablespoons of decaf coffee grounds into the coffee filter anticipating the enjoyment of a cup while I read – my favorite pastime.

I nestle into “my” reading chair with a novel while the coffee starts to brew.  I’ve been reading this book a couple of weeks now and as I get drawn into the story line once again (when I read, I am there in the story), the lights suddenly . . . . go out.  Seriously, are you kidding me?  The room is immediately engulfed in darkness.  I can’t even make out my hand in front of my face.

Let There Be Light . . . or Not

Fortunately, my husband was always prepared for these types of emergencies.  All I had to do was make it to the laundry room (at the back of the house) from the living room, without killing myself, to find the lantern and candles stored on the VERY top shelf just for such an occasion.  Oh, by the way, I also had to find the step stool in order to reach those items.  I carefully made my way through the house, my arms and hands stretched out to their limits without incident. Yes!Clean Battery Terminal Lantern

 

I found the step stool and reached up for the magic box of light, the lantern and candles, easily enough.  I traced my path back to the kitchen to set my treasure out on the counter, still in the dark.  I opened the box with the lantern as it would be the quickest way to set up all the candles.

 

Once, I had the lantern in my hands I felt for the switch and turned; click, click . . . . no light.  Okay, maybe I turned it the wrong way; click, click . . . still no light.  Alright, not panicking, but concerned.  Oh, maybe the batteries are not in it?  Nope, all the batteries are in it.  Hmmm, maybe the batteries are dead as I haven’t checked on this stuff since my husband passed away in 2014.

First things first as I am still in complete darkness.  I felt around in the box and found the lighter and candles.  I light a few to make it easier to hunt around for batteries. Now where to find some more batteries. . . I know, I just put some in my radio on the microwave . . . whew.   I removed the batteries from the backside of the radio and inserted them into the lantern; click, click . . . still didn’t work??  I know the batteries are good because I was playing the radio a couple of days ago.

Seriously . . .

Back to the lantern. . . I pulled open the battery cover and casing and remCorroded Batteries oved the batteries that I had just inserted.  With the candle I peer into the cavity only to find all this bluish white stuff.  Corrosion! Not only on the terminals, but on the batteries that had been stored in it as well.

Let me tell you it was not very restful or as peaceful as I had hoped to enjoy, to read by the candlelight with all the candles spread out on my kitchen table for 3 hours while waiting for the electricity to come back on.  Not to mention, I didn’t get my coffee either! I am also sure I will suffer repercussions from  caffeine withdrawal, peace deprivation, and the strain on my eyes for years to come (alright, a slight (big) exaggeration).

When the electricity came back on one of the first things I did was to contact Wiebke and ask her if she was agreeable to creating a video on How To Clean Corroded Battery Terminals.  I was determined not to go through another episode of NO lights (can you tell, I am still traumatized).

After much research The Hard Hat Belles filmed Cleaning Corroded Battery Terminals. I now have a clean lantern, minus batteries not being stored in it, ready to go for the next electrical outage.

SAFETY FIRST!

It is very important that you understand that the goggles and rubber gloves are a must.  Sure, you could do them quicker without these items, but you only get one pair of eyes and hands – Let’s protect them.  For the science and hazard information behind the corrosion that can be harmful – check out one of the many US Department of Health and Human Services analysis reports within their Household Products Database at their website.

Supplies You Will Need

Corroded battery supplies for cleaning

Rubber gloves, paper towels, white vinegar, a syringe, water, a hammer, a flat-tip screwdriver and a hard surface to work on.

Step 1:  Take out or pry out the corroded batteries, if needed. You may need to tap on it with a hammer or pry it out with flat tipped screw driver.

Corroded Batteries

Step 2:  Dispose of the batteries properly. For more information on how to dispose of batteries safely and why – check out the Environmental, Health, and Safety Online website and the Earth911 website.

Step 3:  To get rid of the corrosive deposits from the inside of the lantern use a syringe filled with vinegar and spray it directly onto the corroded terminals.  There will be some bubbling as the vinegar reacts with the corrosion.

Corroded Battery Terminal

Step 4: Using a toothbrush, gently scrub the terminals until the corrosion is gone and the metal is all shiny (or mostly shiny).

Cleaned Battery Terminals

 

Step 5: Rinse the parts you cleaned thoroughly with water. You can again use a syringe to target the specific area that had corrosion on it.

Step 6: Dry the areas you cleaned as much as you can with paper towels or a regular small towel. Make sure to air-dry the lantern completely before re-installing new batteries. This may need an overnighter drying.

Note: Disclaimer

And there you have it! A shining lantern with no corrosive battery terminals ready to be loaded with batteries and put to work.

To watch more of our crazy videos check out our YouTube channel “TheHard Hat Belles” or click  The Hard Hat Belles to go directly there.  Once there like and subscribe to receive notifications of the latest video releases. Or simply subscribe here to see each of our videos within our blog stories. . . .  You’ll be getting two for the price of one!

Please subscribe to our blog here or above.

 [wysija_form id=”4″]

May Your Day Be Spent

Inspiring Hope

Ps 18:28

Love & Hugs,

Denine & Wiebke

The Hard Hat Belles Logo

Small Hand Tools – Tricks and Hacks

Small Tools Cheats

Hi Y’all!

Welcome to our corner of the web.  We’re glad your here to learn and enjoy a few laughs with us.  Wiebke is off to Canada and she left me in charge here (big mistake), so we will just have to enjoy a few extra laughs on her behalf. You really need to check out some of the pictures I have added of her.  So, grab that seat and beverage and check out what we’ve been up to.

Tea for twoLearning to Use Hand Tools

When my husband, Bill passed away a little over a year ago I was stuck with having to do some small repairs around the house and grounds.  Mind you, I considered myself pretty smart and Bill did show and teach me a lot about house maintenance………..or so I thought.  I don’t think you truly realize how much a person does or impacts your life until they are gone. Whether they went to heaven, you’re newly divorced or you’ve moved out on your own.  It can be really tough trying to cover everything especially when you don’t really know anything.

Needless to say I started doing repairs and maintenance around the house and found that I wasn’t as handy as I would have liked.  I could barely hold a screw and screw it in – not to mention that I couldn’t hold a nail and hammer it in without pounding not only my thumb, but I managed to bruise my whole hand.

So this started my journey into reading books, watching videos, and researching the internet to find out how to actually handle tools properly.  Along the way I picked up a few tricks (or hacks) that helped me do things easier or simpler.

The Hard Hat Belles &The Hard Hat Belles Tools Tools

Not only was learning how to do things that my husband would do one of the reasons that we developed The Hard Hat Belles, but tools also played a big part in our decision to teach others (mainly geared at tool clueless women and girls of all ages).  Wiebke was and is my cohort in helping me to figure things out after Bill passed.  She is also married to a very handy man and believe me, she picks his brain more than ever now.

If you are like me – one of those people who are just too stubborn to think they can’t do it or someone who just can’t afford a handy man then our blog and videos will teach you as we learn ourselves. Plus as an added bonus we can all have a few laughs along the way.

SAFETY FIRST

Wood or metal handled hammer

We may joke about tools, but here at The Hard Hat Belles we always believe in safety first!  Please use safety when you are doing a project involving tools.  We each only get two eyes and hands, if we’re blessed – let’s protect them (disclaimer).

Protect your eyesSafety Gloves

Small Hand Tool Tips, Tricks & Hacks

We hope our small hand tool video showed you some new tips on how to use those hand tools of yours.  Plus stick around we have some awesome tips listed below.  Let us know in the comments below which ones have worked best for you or if you have some new ones we didn’t list.  We love hearing from you!

Small hand tools

  • Use a man’s pocket comb to hold a screw or nail
  • Use a clothes pin with a spring to hold a nail or screw
  • Use a plastic lid or piece of firm cardboard to hold a nail or screw by cutting a slit in it
  • Use an old pair of gloves to cover plier tips to keep from leaving teeth markings in the project you are working on.  You can also  remove the fingers from old holey ones and keep them handy (toolsmithdirect.com)
  • Use a rubber band and wrap it around the plier handles to hold the the item you want held like a vise or if you need to step away from a project for a moment (bathroom call) it will be held in place
  • An easy way to identify a jar of screw drivers is to simply mark the top with a design of the tip using a marker, nail polish, white-out etc.
  • Use a hammer size your “hand” is comfortable using
  • Grip a hammer towards the end of the hammer for better contact with a nail (gripping towards the bulky top can cause you harm and will take forever to hammer that waMeasuring tapey)
  • If your retractable measuring tape starts to get sluggish put some car wax on both sides then wipe it off  (elec-toolbox.com/ under Tricks of Trade)Measuring Wiebke

To watch more of our crazy videos check out our YouTube channel “TheHard Hat Belles” or click  The Hard Hat Belles to go directly there.  Once there like and subscribe to receive notifications of the latest video releases.

And please subscribe (below) to our blog  (you will get both the video and blog update) or above so we can keep you up to date on what crazy stuff we have been doing.

[wysija_form id=”4″]

For words of encouragement (because we know life can be tough) check out our Inspiring Hope page.

Rom 15:5Love & Hugs,

Denine & WiebkeTHHB Logo